Description
Eterra Auger Stump Planer
Description
The Eterra Auger Stump Planer is a cost-effective and high-quality accessory, designed to fit with Eterra 3500 and 4500 model auger drives. If you frequently encounter pesky stumps impeding your work, but not enough to warrant a dedicated stump-grinding machine, this attachment could be your solution. Instead of outsourcing stump removal, utilize your Eterra Auger to incorporate the Stump Planer onto your 2-inch hex drive.
This Stump Planer is compatible with any auger possessing a 2″ Hex output shaft, given appropriate torque levels. If you don’t have a 2″ Hex output shaft, consider our Eterra Auger Adapters.
This planer is complete with three replaceable steel tool cutters that are able to be sharpened, and a starter tip with an 18″ digging depth. Equipped with guides on the cutter’s trailing edge, the planer does not recoil from the hole. The starter tip aids in pushing the planer through the stump, avoiding overload or jamming.
Stump Planer Torque Requirements:
Torque output depends on your auger drive’s rating and your loader’s hydraulic flow. For torque output information, refer to your auger drive’s specifications or consult with the manufacturer.
10″ Stump Planer Torque Range: 2,200-6,000 Ft. Lbs.
14″ Stump Planer Torque Range: 3,300-6,000 Ft. Lbs.
**Please note: this accessory is not recommended for hard wood or green wood (fresh) stumps. Given appropriate torque levels, it’s possible that this will work for you, but productivity may be limited. Give us a call to confirm how you will be using this stump planer and we will happily steer you in the right direction.**
Features
- Available in 10″ and 14″ sizes
- Attaches to 2″ hex drive
- Capable of boring up to 18 inches
- Compatible with auger extensions for deeper drilling
- Combine the 10″ Planer with the Eterra 3500 Auger Attachment
- Combine the 14″ Planer with the Eterra 4500 Auger Attachment
Reviews
There are no reviews yet.