Skid Steer Telescopic Auger | Digga

Description

Digga Skid Steer Telescopic Auger Attachment

Description

The Telescopic Auger is built with an Eaton bell motor and input housing, this innovative design allows the gearbox to go down into the digging hole to maximize drilling depth without extensions. 

TPE Extension Mount

Digga’s telescopic piling & drilling mounts increase your reach for added drilling depth (over 11.5′ deep) or helical pile installation. These telescopic extension mounts for skid steer and tracked loaders are engineered for use with drives up to 16,000 ft-lbs.

The mount features a telescopic boom that extends to 14 ft, and retracts to under 7 ft for storage and transport. 

Add-On Halo Alignment System

This Auger Drive Attachment is compatible with the Digga Halo Auger Alignment System. The Halo Auger Alignment System Utilizes a band of LED lights, which indicate when the auger is plumb, no need for a spotter to guide the operator. If the Auger were to ever move out of its plumb position, the Halo Auger Alignment System will light up, which will easily guide the operator to maneuver the Auger back into its plumb position. Thanks to the Highly Visible Indicators, holes will be drilled plumb every time, reducing the amount of sideload on augers, which prevent expensive repairs, and allows you to reduce the amount of concrete needed to fill holes thanks to the precise drilling enabled by the Halo Alignment System. The Halo Auger Alignment System is available in two powering options; No-Setup Battery or the standard 12v Cigarette Lighter Socket Wire.

Want to add an ECV anchor drive, give us a call: 866.966.2538

Features

• Universal Quick Attach fits all modern skid steer loaders
• Compact high torque Digga manufactured gearbox
• Digga designed Eaton motor with integrated pressure relief valve 
• 2 piece shaft design ensures maximum side load ratings without increasing load on the bearings
• 5 year warranty on the gearbox
• 3 year warranty on the motor  
• Easily converted to a screw anchor drive with the addition of our patented ‘anti kickback valve’. 
• TPE Mount extends to 14 ft 
• Increases operator visibility
• Combine with Digga Auger Extensions for increased drilling depth
• Halo Auger Alignment System Compatible (Minimum 2DSS Auger Drive)
• Manufactured in USA
• 2″ Hex or 2.5″ Hex standard output shaft (2.5″ Round also available)

What’s Included?

• Skid Steer Telescopic Auger Attachment
• Universal Skid Steer Mounting Plate
• Owner’s manual